This ALL New Generation 2.0 Tie Rod Adjuster from Superior Engineering has been designed to suit the D22 STR/DX model Nissan Navara four wheel drive vehicle.
Superior has designed this adjustable Tie Rod assembly to prevent the tie rods from bending after doing a lift or adding bigger tyres to your truck… Perfect for D22’s with lifts from 0″-3″ inches.
These tie rod adjusters offer a HUGE strength upgrade over OE and bolt straight up to OE steering linkages… making them a complete bolt-in replacement for your factory adjusters!
Features two heavy duty 3mm weld on skid plates to stop the tie rod nut fouling on the chassis, which can cause the tie rod to SNAP if the vehicle “Centre Rod” becomes worn or takes on hard impact which is transmitted to the steering.
This component is proudly made right here in Australia, manufactured from high tensile steel, cnc machined for the ultimate in durability and strength, then sand-blasted and finished off in a 7-Step SA5 Zinc coating for maximum corrosion resistance.
The kit includes Tie-Rod Adjusters, Weld-on skid plates, Heavy Duty Rod-Ends, ITS sealing rings, locking nuts and cotter pins.
These adjusters are 100% Street Legal and Compliant, and DO NOT require separate approvals to be used on Public roads within Australia.
They are sold as a pair and come ‘Ready to Fit’ straight out of the box with easy to follow fitting instructions.
To up the stakes even further, Superior Engineering now includes ITS Seal Technology on internally threaded adjustable suspension linkages, eliminating the ingress of moisture or liquids that can cause corrosion or rust.
By adding a specially machined seal groove and incorporating a hydraulic seal between the locking nuts, the thread and the link, a perfect pressure tight seal is created.
This patented process is EXCLUSIVE to Superior Engineering’s internally threaded items such as these tie rod adjusters.
To top it all off, the Superior logo is engraved onto the rods to ensure you’re getting a GENUINE Superior Engineering component instead of a cheap inferior copy from other manufacturers.
Features & Benefits
- HUGE Strength Upgrade Over OE Components
- Includes High Tensile Locking Nuts
- 32mm High Tensile Steel Adjuster
- Quality Superior Tie Rod Ends
- ITS Corrosion Resistant Seal Technology
- Supplied With 2 x Premium Heavy Duty Skid Plates
- Bolts-Up To OE Steering Linkages
- Hard Wearing 7-Step SA5 Anti-Corrosion Zinc Coating
- Fitting & Maintenance Instructions Included
The kit comes ‘Ready to Fit’ straight out of the box, for a 100% bolt-in installation with NO cutting, drilling or welding needed.
It simply bolts straight up to the original mounting points using original mounting hardware for superior strength.
Includes the following component:
- 2 x Tie Rod Adjusters
- 2 x Right Hand Thread Rod Ends
- 2 x Left Hand Thread Rod Ends
- 1 x PS D22 Tie Rod Skid Plate
- 1 x DS D22 Tie Rod Skid Plate
- 2 x M20 LH Thread Nuts
- 2 x M20 RH Thread Nuts
- 4 x Castle Lock Nuts
- 4 x 22×2.5 O-Rings
- 4 x Cotter Pins
Get rid of those puny 14mm adjusters and upgrade to a MASSIVE 32mm High-Tensile steel adjuster rod, fitted with Extra-Heavy duty 20mm male thread rod ends.
Upgrade now to a Superior Engineering D22 adjuster and take home ‘Piece of Mind’ that you’re buying the strongest components in Australia.
These Tie Rod Adjusters are available to purchase online 24/7, over the phone during business hours or in-person at the Superior Engineering Deception Bay 4×4 Retail Showroom.
Buy This Kit Online