Ironman 4x4 Roof Top Tent

Ironman 4×4 Roof Top Tent

Camp Anywhere with the Ironman 4×4 Roof Top Tent and Annex

The Ironman 4×4 tent is manufactured from premium-quality, waterproof and breathable, rip-stop material, and features YKK zippers and fly-screen windows. A raised climate cover flysheet helps control interior temperature, as well as reduce condensation. The lightweight, foldout, aluminum-insulated floor supports a 65mm high-density foam mattress and provides room for two to sleep comfortably. When collapsed, the rooftop tent is kept secure and protected from the elements by a rugged, 1000D water-proof PVC cover. When open the tent offers ample interior
space.

With the tent set up the optional Annex can be hung to create additional privacy around the base of the ladder. The Annex also helps control interior temperature by acting as a wind block for the tent entrance.

The Ironman 4×4 Instant Awning can be added to the tent to create a shaded multi-use area at the opposite side of the vehicle from the tent entrance. The awning can also be secured to most factory roof bars and/or racks. The Instant Awning offers a quick set up and includes self-standing, extendable aluminum legs, guy lines, and ground stakes. When set up, the awning offers 84×98 inches of 100-percent UV-protected shade.

Whether you’re camping for one night or living in your 4×4 on a multi-week trail adventure, the Ironman 4×4 Luxury Rooftop Tent has you covered.

Find Out More

Ironman 4x4 Rooftop Tent fully setup
Ironman 4×4 Rooftop Tent fully setup

The Ironman 4×4 Luxury Rooftop Tent mounts directly to most vehicle roof bars and racks. When collapsed the tent is protected from the elements by a rugged, 1000D waterproof PVC cover.

Rooftop Tent mounts directly to most 4x4 roof bars and racks
Rooftop Tent mounts directly to most 4×4 roof bars and racks

Easy to set up, the Ironman 4×4 Luxury Rooftop Tent and Annex comes complete with all necessary installation hardware and instructions.

The retractable aluminum ladder is used as a leverage point
The retractable aluminum ladder is used as a leverage point

The retractable aluminum ladder is used as a leverage point in folding out and raising the tent. With the tent raised the retractable aluminum ladder sits under cover from the elements, allowing you to pull off wet gear before climbing in to the tent. A ladder extension kit is available for lifted vehicles.

Inside view of the Ironman 4x4 Rooftop Tent
Inside view of the Ironman 4×4 Rooftop Tent

A 65mm high-density foam mattress sits atop the insulated aluminum floor. There’s easily room for two, and you could even pile in some small kids provided you don’t exceed the maximum weight capacity of your vehicle’s roof rack. Overall dimensions for the tent measure 55 inches wide by 94 inches long by 47 inches high.

The Ironman tent is supplied with an awning
The Ironman tent is supplied with an awning

The Ironman tent is supplied with window awning support rods that can be bent to the appropriate angle to provide increased coverage from the elements. A raised flysheet is also included.

The tent can be situated so that the tent entrance is at the driver or passenger side of the vehicle, or even at the rear, which is recommended for larger vehicles. When mounting the tent with the entrance to the rear you’ll need to make sure you have enough clearance for a pop-up rear hatch to open fully.

The roof top tent entrance
The roof top tent entrance

The supplied roof rack mounts for the tent simply clamp the base of the tent to the factory roof bars. The installation was very simple. This method also allows the tent to moved from one vehicle to another with minimal effort.

The Annex includes a sturdy, 1000D waterproof PVC zip-in floor and a zip-away panel that allows access in to the vehicle.

The roof top tent stays well ventilated
The roof top tent stays well ventilated

The Ironman 4×4 Instant Awning is manufactured from waterproof, breathable material that provides 100-percent UV protection. The Instant Awning secures to most vehicle roof racks and bars. Guy lines and ground stakes are included.

The Instant Awning features self-standing and extendable aluminum awning support poles. When set up the Instant Awning creates 84 by 98 inches of coverage. Optional mosquito netting is also available.

We really like the covered tent entrance and Annex as it greatly increases the functionality of the tent: it creates a sheltered entrance in to the tent and vehicle to access gear or sleeping space; it can be used as a galley or privacy area that’s out of the elements; there’s even enough room to fit a cot to create additional sheltered sleeping space.

With windows on three sides and the door opening on the fourth side the tent stays well ventilated in hotter climates. The windows can be zipped shut for colder weather camping.

Front view of the rooftop tent setup
Front view of the rooftop tent setup

The tent’s compact size when stowed won’t compromise your vehicle’s wheeling ability, but do be conscious of the fact that you have additional weight at the top of the vehicle so your center of gravity will be slightly higher than normal. It’s also a good idea to measure your vehicle height with the tent installed to ensure that you don’t enter a parking garage or other low overhang that may cause damage to the tent and/or your vehicle.

The Ironman 4×4 Roof Top Tent and Annex creates premium camping regardless of your location!

Buy Online

Features:

  • Raised "Climate Cover" Flysheet to control temperature andreduce condensation
  • Pop Up Window awning
  • Flyscreen Windows
  • Premium quality waterproof,breathable ripstop material
  • Lightweight Aluminium and Insulated Floor
  • Luxury 65mm High Density Foam Mattress
  • Retractable Aluminium Ladder with Entrance Under Cover
  • YKK Zips
  • Annex included
  • Rugged 1000D Waterproof PVC ‘On Car’ Cover
  • 1.4m wide x 2.4m long x 1.3m high
  • High Lift Extension Kit Available

Video on How To Setup Ironman 4×4 Rooftop Tent & Awning

Download the Installation Guide!

This user guide also includes installation and setup for optional Ironman 4×4 annex and ladder, and annex extension.

The Ironman Rooftop Tent is designed to fit a variety of different roof rack styles.

The following user guide will help you with installation suitable for your application.

Images

Setting up the Ironman 4x4 rooftop tent on a 200 Series Landcruiser
Setting up the Ironman 4×4 rooftop tent on a 200 Series Landcruiser

Climbing up the ladder to get into the Ironman 4x4 rooftop tent
Climbing up the ladder to get into the Ironman 4×4 rooftop tent

Front view of the Ironman 4x4 rooftop tent complete setup on the 200 Series
Front view of the Ironman 4×4 rooftop tent complete setup on the 200 Series

Complete campsite featuring the Ironman Roof Top Tent
Complete campsite featuring the Ironman Roof Top Tent

Comments

  1. Derrick April 28, 2015 at 7:04 am

    Good morning.

    Will this tent and awning fit on a 2006 dodge ram 1500 quad cab 4×4?

    1. 4×4 Accessories [Post Author] April 28, 2015 at 10:46 am

      Hi Derrick

      Unfortunately this will not fit the 2006 dodge ram. It requires a roof top basket mount. And we don’t have this.

4 thoughts on “Ironman 4×4 Roof Top Tent”

  1. Hi,
    Don’t know if your’e still answering questions but need to know the weight of the tent with and without annex. If you could let me know ASAP that would great.

    Thank you

    1. Hi Cristi
      The ironman roof top tents can fit on any vehicle providing they have a roof rack fitted. They are a multi fit design so will bolt straight on to most conventional rood racks.

Leave a Reply

Your email address will not be published. Required fields are marked *