Crossmember With Diff Drop Toyota Landcruiser 100 Series

Crossmember With Diff Drop Toyota Landcruiser 100 Series

This is a Superior Engineering Heavy Duty Cross Member with a 20mm Diff Drop to suit the Toyota Landcruiser 100 Series (IFS Front) four wheel drive vehicle.

Video

Design Objectives

The problem with Independent Front Suspension (IFS) vehicles after fitting a suspension lift is the mis-alignment of the front diff and suspension geometry.

This limitation with IFS design is the major cause of vibrations, steering problems and premature wear and damage to the vehicles cv joints and cv boots.

The Two Main advantages of the Superior newly designed crossmember bracket are:

  1. They are designed to replace your OE / factory crossmember with something much stronger which can withstand harsh punishment and rigors of driving offroad.
  2. They are also designed to correct the geometry on the front driveshaft and drop the front differential 20mm lower to re-align and fix the cv angle after a lift has been fitted.

That’s a whole lot of bang for your buck.

Advancements

The crossmember is CAD engineered for the ultimate in durability and strength, laser cut from tough heavy duty 350 grade high quality Australian steel, CNC pressed for a precise fit, then sand-blasted and powder coated for hard wearing corrosion resistant protective finish.

Small drain holes are also included for easy drainage, the member utilises factory mounts for a straight up fit, and fabricated by trained qualified professionals.

This Crossmember is proudly manufactured right here in Australia by Superior Engineering ensuring you get a true quality GENUINE component, unlike the slightly cheaper and greatly weaker Chinese versions starting to appear in the marketplace.

A full fitting kit is provided, which includes all the necessary high tensile bolts, spacers, washers and instructions for a quick, easy, installation.

To top it all off, they are 100% Street Legal and Compliant, and DO NOT require separate approvals to be used on Public roads within Australia and it’s territories.

This Superior CrossMember and diff drop kit is the best investment you can make to extend the life of your cv joints and suspension components.

Upgrade now to a Superior Engineering CrossMember with Diff Drop and take home ‘Piece of Mind’ that you’re prolonging the life of your IFS suspension system and that your 4×4 vehicle is fitted with a properly designed structural crossmember.


Want More Information

Technical Features

  • 20mm drop to fix CV angles
  • Heavy duty structural aftermarket component
  • Made from premium Australian 350 grade 4mm steel
  • Features a simple design for easy care and maintenance
  • Utilises factory mounts for added strength
  • Fabricated by trained qualified professionals
  • Made in Australia at the Brisbane warehouse and workshop
  • Corrosion resistant finish for a long life
  • Manufactured by Superior’s highly trained qualified professional fabricators
  • Sand blasted and powder coated
  • Precision machined cut spacers
  • Laser cut for a precise fit

Installation

The kit comes ‘Ready to Fit’ straight out of the box.

Includes all grade 8 hardware, for a direct 100% bolt-in installation with NO cutting, drilling or welding needed.

Includes the following components:

  • 1 x Crossmember
  • 2 x 40mm x 20mm Steel Boss
  • 6 x 30mm x 20mm Steel Boss
  • 6 x M8 1.25 x 40mm Bolts
  • 6 x M8 Spring Washers
  • 6 x M8 Flat Washers
  • 1 x M14 x 130mm Bolt
  • 1 x M14 Flat Washer

Gallery

A Superior crossmember on the display wall at the retail showroom
A Superior crossmember on the display wall at the retail showroom

Front view of a heavy duty Superior crossmember on the display at the 4x4 retail showroom
Front view of a heavy duty Superior crossmember on the display at the 4×4 retail showroom

Closeup view of the heavy duty Superior crossmember with diff drop showing the mounting points
Closeup view of the heavy duty Superior crossmember with diff drop showing the mounting points

Closeup view of the heavy duty fabrication, welding, cnc folding and black powder coat finish
Closeup view of the heavy duty fabrication, welding, cnc folding and black powder coat finish

Rear view of a Superior crossmember with diff drop showing the quality fabrication and laser cut precision
Rear view of a Superior crossmember with diff drop showing the quality fabrication and laser cut precision

A complete set of grade 8 hardware to fit the Superior crossmember with diff drop kit
A complete set of grade 8 hardware to fit the Superior crossmember with diff drop kit

A completed Superior crossmember with diff drop kit fitted to the 100 Series Toyota Landcruiser (Front view)
A completed Superior crossmember with diff drop kit fitted to the 100 Series Toyota Landcruiser (Front view)

A completed Superior crossmember with diff drop kit fitted to the 100 Series Toyota Landcruiser (Rear view)
A completed Superior crossmember with diff drop kit fitted to the 100 Series Toyota Landcruiser (Rear view)

Summary

Just to recap, the Superior Engineering crossmember with diff drop is Australian made and manufactured from premium 350 grade steel, then CNC machined for the ultimate in durability and performance.

They are designed to suit the 100 Series Toyota Landcruiser four wheel drive vehicle.

This underbody component is sand blasted and black powder coated for maximum durability and the highest quality finish.

Even the Superior logo is pop riveted into the crossmember to ensure you’re getting a true quality GENUINE 4×4 accessory.

So, if you want to protect your vehicle CV joints and suspension geometry then you need a Superior Engineering structural crossmember with diff drop.

They are available to purchase online (24 hours a day – 7 days a week), over the phone during business hours or in-person at the Superior Engineering Deception Bay 4×4 Super Showroom.


Want More Information Click Here or Comment Below

2 thoughts on “Crossmember With Diff Drop Toyota Landcruiser 100 Series”

  1. Just wondered what price and postage to Darwin?
    CROSSMEMBER WITH DIFF DROP TOYOTA LANDCRUISER 100 SERIES

Leave a Reply

Your email address will not be published. Required fields are marked *