Smart, affordable and prewired for virtually foolproof DIY flush mount installation… Baintech Distribution Panels let you charge and power multiple 12 volt devices at the same time from your dashboard or from the rear drawer in your 4WD.
As with all Baintech products, safety comes first: our Distribution Panels are fitted with circuit protection and 20amp resettable breakers.
For added convenience, each Distribution Panel also features 4 on/off switches so you can control each socket individually and use the fourth switch as you wish.
The ROK20 Compact series of utility LED lights is available in a flood and spot beam pattern, suitable for a wide variety of applications: heavy equipment usage, mining, marine, off road vehicles and ATV’s.
High grade US cree chipsets and drivers resulting in superior performance over other LED’s out there in the market.
Hard coated, scratch and impact resistant polycarbonate lens for long term reliability.
DEUTSCH connector with custom made dual injected moulded strain relief fitted to a high tech military specification grade cable.
Military waterproof membrane pressure equalisation filter with a mechanical lock that positively seals into the housing, ensuring long term reliability as does not require adhesive to hold in place.
Pulse width modulation circuitry ensures maximum efficiency by fully controlling voltage to the individual driver assemblies, resulting in lower power consumption and prolonged LED life.
Multiple finned high pressure cast aluminium housing finished in UV-resistant automotive coating, ensures the light is going to stay looking great.
High pressure cast aluminium body
10w IP68 / 20w IP69k to protect against moisture / contaminant ingress
Hard coated, scratch and high impact resistant polycarbonate lens
Custom fabricated dual injected molded strain relief connector, fitted to military specification grade cable
Waterproof rating: ROK20 – IP69K
Military specification waterproof membrane with mechanical seal
The Piranha Offroad Alternator Output Compensator AOC makes using a DC/DC isolator for dual battery management a thing of the past, for many vehicles.
Using the Piranha AOC in conjunction with a Piranha Dual Battery manager, DBE140S or DBE180-SX, allows you to use the full available output of the alternator to recharge your auxiliary battery / batteries while the vehicle is in use.
It will also charge your main battery if you have changed to a high technology AGM style battery.
The AOC is designed for use with many of today’s current 4×4 vehicles with VARIABLE RATE ALTERNATORS which up to now used a DC/DC style isolator, which is a high cost solution and limited to the output of the DC/DC. Most times slowing down the recharge time.
For such a small device it packs a very capable electronics package to provide a very useful .4Volt -.5Volt increase in your charge rate while still affording all the protection of a fused circuit as required by the manufacturer.
There are similar looking devices available that do not offer the fused protection of the Piranha AOC and are only one way.
Research and engineering have combined to provide this low cost, high technology solution, suitable for today’s vehicles.
Suitable for the following four wheel drive vehicles:
Toyota Prado 120 Series
Toyota Prado 150 Series
Toyota Hilux 2005 Onwards
Toyota Landcruiser 200 Series
Toyota Landcruiser 79 Series
Toyota Landcruiser 79 Series with V8 Diesel
Will suit other vehicles with ALT Sense wire, ALT S fuse, without a CANBUS system.
With the vehicle running use the multi-meter to establish alternator output at Main Battery, if already 14.5 Volts+, AOC not required.
WARNING: Do not use AOC if measured voltage at main battery is above 14.5V.
Now switch vehicle OFF and make sure ignition is OFF.
Locate fuse box under bonnet.
Remove the small ALT S fuse, usually 7.5 amp or 5 amp.
Refit the Piranha AOC.
Start vehicle and retest with multi-meter, should read 0.4V-0.5V higher than first reading.
If there is an overload or short circuit in the alternator sense cable the AOC is designed to fail, this is not covered by warranty.
The reseller or manufacturer cannot be held responsible for any failures or subsequent events as a result of using this product.
This is a modification to your vehicle and is undertaken at your own risk. Consult your owners manual or vehicle warranty information before making any modifications.
Modifications may affect vehicle manufacturers warranty conditions.
BOOSTS ALTERNATOR OUTPUT BY UP TO 0.5 VOLT
The AOC used in conjunction with a Piranha Dual Battery Manager (DBE140 & DBE180-SX) provides a technically superior solution to charging your auxiliary battery, at a fraction of the cost of using DC/DC step up chargers.